the frame consists of 2 pairs of legs of heavy
flat section steel with forged feet.
bow braces
are rivetted at lower and mid points.
a flat section cross brace stabilizes the frame.
the components are rivetted together.
- timber surface is secured to a steel angle
section with screws.
- stone surface rests on the angle section
design - hope
materials / finishes...
table frame
mild steel / rust, pickled, galvanised or painted
table surfaces
stone 30mm
-sandstone or limestone
timber 30mm
-jarrah / natural or oiled
outside use - individually secured planks
with 3mm expansion gap
-tasmanian oak / scrubbed or oiled inside use only - planks are joined with
a tongue and groove to form a solid surface