a low table consisting of 4 legs of flat section
steel with forged feet, rivetted to a hoop & bow
brace and a hoop rolled on edge at the top.
- the timber surface is secured to the hoop
with screws.
-the stone surface rests on the hoop.
design - hope 2006
materials / finishes...
table frame
mild steel / rust, pickled, galvanised or painted
table surfaces
stone 30mm
-sandstone or limestone
timber 22mm or 30mm
-jarrah / natural or oiled
outside use - individually secured planks
with 3mm expansion gap
-tasmanian oak / scrubbed or oiled inside use only - planks are joined with
a tongue and groove to form a solid surface